Light weight & easy to handle

Takacats inflatables are light in weight through design and the use of innovative materials such as drop stitch fabrics which make up the high pressure removable floor replacing old and heavier aluminium, ply or fibreglass floor boards. 

Size         Tubes & Transom     Floor     Total
240 L:     15kg                         5kg       20kg
280 L:     18kg                         6kg       24kg
 
Features
Takacats original on / off bow design for safety and convenience.

Aerodynamic tappered bow design to get over the top of rough and choppy waters providing a dry ride.
 
High pressure removable air deck floor system. 
 
Single seam design joint by chemical bonding gluing system ideal for foldable inflatables.
Shallow Draft: A huge advantage when crossing shallow water and also provides the ability to get further up the beach or ramp before the hull of the boat grounds.
 
Heavy-duty under-tube protection.

2 x air pressure release valves.

External oar rowlocks and valcrow straps.

Inflatable seat.

External safety lines.

Construction
Tube construction: Tough 0.9mm, 1000 denier custom made PVC, inflate to 3psi. 

Anti-UV grade tested to 4-5 out of 5. International Standards ISO 4892-3:2006

Air deck floor made from reinfored drop stich to provide a high- tensile rigid core. Inflate to 8psi. Custom made ptotective anti-skid with addional anti-UV addative, high-pressure laminated heat pressed to top layer for the best durability and rigidity. Second-layer side rail tape making 1.8mm walls and addional air tightness.
 
Most inflatable boats require the transom, floor, air decks / drop stich, fittings and fixtures to be glued onto the tubes. So when it comes to the seams we have chosen to use our tried and tested gluing system that we also use through out the rest of the boat. This is ideal for roll-up / portabile boats where welded seams can become brittal over time and prone to splitting.

Built to International Standard ISO/6185

Tubes & Tube Protection

Tough 0.9mm, 1000 denier custom made PVC, inflate to 3psi. Anti-UV grade tested to 4-5 out of 5. International Standards ISO 4892-3:2006
 
Additional Tube Protection

heavy duty under tube rubber protection provides added security when beaching

Additional protective layers over each of the single parallel seams running the length of the tubes provides additional strength as well as side protection in this hard hitting area
 
Custom made anti skid tube protection provides a hard wearing floor with a fabric to fabric bonding seams.
 
Up to 50% less seam work than a standard inflatable boats of similar size.
 
Most inflatable boats require the transom, floor, air decks / drop stich, fittings and fixtures to be glued onto the tubes. So when it comes to the seams we have chosen to use our tried and tested gluing system that we also use through out the rest of the boat. This is ideal for roll-up / portabile boats where welded seams can become brittal over time and prone to splitting. 

Air deck floor

Air deck floor made from reinfored drop stich to provide a high- tensile rigid core. Inflate to 8psi. Custom made ptotective anti-skid with addional anti-UV addative, high-pressure laminated heat pressed to top layer for the best durability and rigidity. Second-layer side rail tape making 1.8mm walls and addional air tightness.
 
Heavy Duty Tube Enhancements

"Heavy duty" tube reinforcements protect the tubes, which together with our unique design enables landing almost anywhere. You come close to land when no V-hull gets into the bottom.
 
Included Accessories
Manual pump & pressure gauge
repair kit
oars
1 x inflatable seat
1 x carry bags

Warranty
5 Year fabric warranty / 3 Year construction warranty.